Can ribbon be repeatly?

Reuse is no problem without ensuring the quality of printed images.

 According to the winding direction of the TTP-244Plus carbon belt, when reusing the rolled carbon belt, the installation method of internal carbon should be used. 

When using the rolled carbon belt, it must be flat when installing it for the first time, so that the quality of the rolled carbon belt is better.

However, in general, the back coating of the ribbon fails after use, increasing friction with the print head. The static electricity generated on the carbon tape causes the carbon tape to adsorb a large amount of dust, and repeated use can shorten the service life of the print head. The print head is an expensive and easily worn accessory.

During the process of printing labels, there may be many ink gaps on the carbon tape that have not been transferred to the labels. Generally, these gaps are relatively small, but there may also be large gaps. Some users use these old carbon tapes with large gaps to print labels again to save costs. However, these intervals may not be uniform, which may waste labels and affect the printing effect during printing. Dahema reminds you that more importantly, this approach can easily damage the print head, and the gains outweigh the losses!

If your company needs carbon belts, then you have found the right person. We are the source factory specializing in carbon belts, and anyone with any model requirements can contact us.

【 Go Back 】 | 【 Print 】